This is universal manual and remote (web, IP, cluster) controller for antenna switch or another device with 4 positions. There is universal output driver – you can use +12 V OUT or switching to the Ground. IP remote module (IMPERO32) is optional. It offers you another 8 external outputs for another relays – you can switch ON PA, light, TRX etc. Output is again universal (+12V or GND). Controller has also PTT hot switch protection.
Main functions:
- Universal controller with 4 outputs
- HOT switch PTT protection
- All outputs are universal +12V or GND
- IP/web remote module as option version REMOTE
- IP module with 8 external relays for custom use
Parameters:
- Output is universal +12V or + EXT or to GND
- Output current max. 500mA per output, 500mA total
- Output voltage the same as supply voltage or EXT max. 26V DC
- EXTernal voltage for relays with different voltage than 12V
- Voltage drop for TBD driver typ. 0,2V for +12V input and 0,7V including fuse
- Voltage drop for ULN driver typ. 0,8V for +12V input and 1,3V including fuse
- PTT hot switch protection active to GND (5V logic compatible)
Version with REMOTE control:
Remote module:
- Control your Antenna switch and external 8 outputs with your browser/http
- Web based application with automated updates
- No configuration or firmware upload needed
- Custom button labels by parameter
- Customize your UI or use our control view
- Can be controlled by stream deck and touchportal
- System is part of our station automation infrastructure by DM5XX’s RemoteSwitch.de system
- Remote Control disables front panel switch
- Additional external 8 OUTPUTS – ON/OFF for switching other devices or antennas
- External switching: Universal output driver output +12V or GND
- LAN connection with unique RFI filtering + HV protection
- We recommend a VPN while using remote access from outside your network in general
Parameters for Remote Module / Daughter board OLI IP:
- LAN 10/100 Mbit auto
- ONLY DHCP IP address – not static
- LAN High Voltage double protection
- LAN Common-mode filter = lower RFI emission from LAN cable
- Output is universal +12V or + EXT or to GND
- Output current max. 500mA per output, 500mA total
- Output voltage the same as supply voltage or EXT max 26V DC
- EXTernal voltage for relays with different voltage than 12V
- Voltage drop for TBD driver typ. 0,2V for +12V input and 0,7V including fuse
- Voltage drop for ULN driver typ. 0,8V for +12V input and 1,3V including fuse
- EXTERNAL 8 outputs for custom use
Example for remote control User Interface (UI), there for Stack Match 1-3 controller
Equipment
Icom Launch Innovative IC-R8600 Wideband Communication Receiver
The IC-R8600 is a new, advanced communication receiver with the capability of covering a huge range of radio spectrum from 10kHz to 3GHz as well as ha... Read more
IC-PW2 Prototypes Shown at Tokyo Hamfair 2019
IC-PW2 ICOM Icom Inc. will be unveiling new product innovations at the Tokyo Hamfair, taking place in Ariake, Tokyo on August 31st – September 1... Read more
PicoAPRS Transceiver
“Worlds smallest APRS transceiver with TNC” offers many applications. Matchbox-sized, built-in GPS receiver. The transceiver can not only... Read more
TSG4100A RF Vector Signal Generator
The TSG4100A Series RF Vector Signal Generator offers mid-range performance and up to 200 MHz modulation bandwidth at an entry-level RF signal generat... Read more
New ! OM Power OM2200HF Amplifier 2.2 Kw
General description of the OM Power OM2200HF amplifier The linear amplifier OM2200HF is designed for all short wave amateur bands from... Read more
The New Yaesu FTDX10 [ UPDATE ]
Yaesu FTDX10 New Yaesu compact HF and 50 MHz 100W SDR Transceiver available in December 2020.Functionalities of the top line models in a smaller form... Read more
RETEVIS Finger PTT Motorcycle Helmet Microphone
“Because this is the only thing that makes it possible to talk to other riders over an intercom and talking over the phone without stopping on t... Read more
Filtered 2400 MHz Driver Amplifier Kits Now Available
This kit has been designed by David Bowman G0MRF and contains all the parts required to drive a PA on 2.4 GHz for QO-100. The completed board will hav... Read more
The post New Easy Controller for 4 antenna switch appeared first on QRZ NOW - Ham Radio News.